A sanitary filter press is a liquid filtration machine built specifically for food, beverage, and pharmaceutical production. It removes particles, haze, yeast, microorganisms, and fine solids from a liquid product under pressure. The output is a clear, clean, finished liquid that meets food safety and quality standards.
The word "sanitary" refers to the design standard the machine is built to. Every component that touches the product — the housing, the plates, the ports, the seals — is constructed from materials and to surface finish standards that are safe for food and pharmaceutical contact, easy to clean, and resistant to the bacteria, acids, and cleaning chemicals present in these production environments.
A sanitary filter press is a completely different machine from an industrial filter press. Industrial filter presses — used in mining, wastewater treatment, and chemical waste processing — are built from polypropylene or cast iron and designed to separate solid waste from water. They are not food-contact machines and are not suitable for any food or pharmaceutical application.
Several specific design and material choices define a sanitary filter press and separate it from general industrial filtration equipment.
The frame, plates, inlet and outlet ports, and all product-contact surfaces are 304 or 316L stainless steel. These grades resist corrosion from food acids, alcohol, fruit sugars, pharmaceutical solvents, and the alkaline and acidic cleaning agents used in CIP (clean-in-place) washing.
316L stainless steel adds molybdenum to the alloy, which improves resistance in more aggressive chemical environments. It is preferred for pharmaceutical applications, highly acidic products, and operations where chloride-based cleaning agents are used regularly.
|
Material |
Best For |
Limitation |
|
304 stainless steel |
Wine, beer, juice, syrup, edible oil, general food production |
Less resistant to chlorides than 316L |
|
316L stainless steel |
Pharmaceutical, injectable liquids, high-acid products, aggressive CIP |
Higher cost than 304 |
Rough internal surfaces create microscopic recesses where bacteria and product residues accumulate between production runs. A sanitary filter press has mechanically or electropolished internal surfaces — typically Ra ≤ 0.8 µm for food-grade and Ra ≤ 0.4 µm for pharmaceutical-grade applications.
Polished surfaces clean faster, more completely, and leave no sites for microbiological growth between batches.
The gaskets between plates — which form the pressure seal during filtration — must be food-grade materials. Silicone and EPDM rubber are the standard choices. General industrial rubber compounds are not appropriate for food or pharmaceutical contact applications.
A sanitary filter press drains completely when emptied. No product pools inside the housing between runs. This is important both for product quality and for effective CIP cleaning.

The machine uses cellulose filter sheets — also called filter pads — stacked between rigid stainless steel plates inside the housing. When the machine is clamped shut, the plates and sheets form a series of sealed chambers.
The liquid product is pumped into the inlet port under pressure. It passes through the filter sheets from the inlet side to the outlet side. Particles, haze, yeast, and fine solids are trapped inside the fiber matrix of the sheet. Clear filtrate exits through the outlet port.
This filtration mechanism is called depth filtration. Particles are caught throughout the full thickness of the sheet — not just at the surface. That gives the sheet high particle-holding capacity and long service life per batch.
Sheets are single-use consumables. After each production run, the machine is opened, used sheets are removed, and fresh sheets are loaded for the next batch.
Sanitary filter presses come in several configurations. Each suits different production scales, automation requirements, and applications.
A manual hydraulic stainless steel plate and sheet filter for wine, vinegar, grape juice, and oil uses a hand-operated hydraulic pump to clamp the plate stack before each run. The operator monitors pressure manually during filtration.
This configuration suits small to medium production operations, craft producers, and applications where a dedicated operator is present during each run. Capital cost is lower than automated options.
An automatic hydraulic machine uses a powered clamping system. Clamping is faster and more repeatable than manual operation. Suited to medium and large production volumes.
A PLC-controlled hydraulic stainless steel plate and sheet filter press for fine filtration automates pressure monitoring and pump speed control throughout the run. The PLC tracks pressure rise, adjusts flow to maintain consistent conditions, and can trigger alarms or automatic shutdown at end-of-run pressure.
This is the right choice for pharmaceutical production, high-value beverage products, and operations where GMP documentation and process consistency are required.
A stainless steel plate and sheet filter press with cooling system is used when the liquid needs to be filtered at a controlled low temperature — cold filtration of wine, temperature-sensitive pharmaceutical solutions, or products where heat exposure affects quality.
A round plate stainless steel filter press for the medicine industry uses circular plates rather than rectangular ones. This design minimises dead zones inside the housing, improves drainage, and is widely used in pharmaceutical and fine chemical production where product loss and contamination control are priorities.
The sanitary filter press handles a wide range of liquid products across food, beverage, and pharmaceutical industries.
|
Industry |
Liquid Product |
Filtration Goal |
|
Winery |
Wine — red, white, rosé, sparkling |
Remove yeast, lees, haze — produce bright stable wine |
|
Brewery |
Beer, craft ale, cider |
Remove yeast and haze before packaging |
|
Distillery |
Spirits, baijiu, whisky, gin |
Polishing to brilliant clarity before bottling |
|
Juice production |
Fruit juice, vegetable juice |
Clarification and haze removal |
|
Sugar / syrup |
Glucose syrup, cane syrup, fructose |
Remove carbon particles after decolorization |
|
Edible oil |
Coconut oil, sesame oil, palm oil |
Particle removal and clarity for retail packaging |
|
Vinegar / soy sauce |
Rice vinegar, balsamic, soy sauce |
Clarification and particle removal |
|
Pharmaceutical |
Injectable solutions, API liquids, herbal extracts |
Bioburden reduction, particle removal to GMP standard |
|
Cosmetics |
Essential oil, serum, toner |
Fine particle removal for clear finished product |
The filter sheets loaded into a sanitary filter press are selected by grade depending on the liquid and the target clarity level.
|
Grade |
Retention Range |
Common Application |
|
K100 (coarse) |
5 – 10 µm |
First-pass clarification of turbid wine, juice, or broth |
|
K250 (medium) |
2 – 5 µm |
General clarification — beer, juice, syrup |
|
K700 (fine) |
0.5 – 2 µm |
Polishing — spirits, edible oil, wine pre-bottling |
|
K900 (polishing) |
0.2 – 0.5 µm |
Bright beer, pharmaceutical pre-filtration |
|
EK / EKS (sterilizing) |
< 0.2 µm |
Bioburden reduction — pharmaceutical and cold-sterile beverage |
The same machine handles all these grades. Changing the sheet grade changes the filtration performance without modifying the equipment.
This comparison is worth stating clearly because the terminology overlaps in search results and product listings.
|
Feature |
Sanitary Filter Press |
Industrial Filter Press |
|
Purpose |
Liquid product clarification |
Sludge and slurry dewatering |
|
Output |
Clear finished liquid — the product |
Solid waste cake — the water is discarded |
|
Material |
304 / 316L stainless steel |
Polypropylene or cast iron |
|
Filter media |
Cellulose depth filter sheets |
Woven polypropylene filter cloth |
|
Cleaning |
CIP-compatible, food-grade |
Industrial washdown |
|
Industries |
Food, beverage, pharmaceutical |
Wastewater, mining, ceramics, chemical waste |
|
Applicable standard |
Food grade, GMP, FDA-compliant materials |
Industrial waste processing |
If the machine is polypropylene or cast iron and the output is a solid cake — it is not a sanitary filter press and has no place in food or pharmaceutical production.
Four questions guide the selection:
1. What liquid is being filtered?
This determines the material grade needed (304 vs 316L), the required surface finish, and whether a cooling or temperature-controlled configuration is appropriate.
2. What is the production volume?
Plate size (20 × 20 cm, 40 × 40 cm, or 60 × 60 cm) and plate count determine flow rate and batch capacity. A full range of stainless steel sanitary filter presses covers configurations from compact craft-scale units through to large commercial production machines.
3. What level of automation is needed?
Manual hydraulic suits small operations with a dedicated operator. PLC-controlled suits pharmaceutical environments and high-volume production where consistency and documentation matter.
4. Is a filter aid pre-coat needed?
For very high turbidity liquids — crude juice, turbid fermentation broth, post-carbon syrup — an automatic hydraulic filter-aids pre-coated plate and sheet filter press applies a diatomite or perlite pre-coat automatically before each batch, protecting the filter sheets from the heaviest part of the particle load and extending sheet life substantially.
Biopharmaceutical plants also specify the same press for cell harvesting, where the dewatered cake is easier to handle than centrifuge paste.
For process development or small-batch production before scaling to a full production machine, a lab-scale mini plate and sheet filter provides a practical starting point using the same sheet grades and operating principles as production equipment.