A Small Filter Press delivers the exact same high-pressure solid-liquid separation capabilities as our massive industrial units, but is engineered into a highly compact, space-saving footprint. Designed specifically for small-to-medium enterprises (SMEs), boutique manufacturing, and low-volume wastewater treatment, these presses provide an incredibly cost-effective solution without compromising on structural durability or filtrate clarity.
At Yuwei Filtration Equipment, we manufacture a premium range of small-scale filter presses, including manual jack, manual hydraulic, and semi-automatic configurations. Available in 315mm, 400mm, and 630mm plate sizes, our compact systems are the perfect dewatering choice for craft breweries, artisanal edible oil workshops, small stone-cutting facilities, and commercial laundries looking to minimize their waste disposal costs with limited floor space.
Not every facility requires a multi-ton, fully automated filtration plant. For operations producing less than 5 cubic meters of sludge per day, investing in a large system is economically inefficient. The Small Filter Press bridges the gap, offering robust mechanical dewatering that fits comfortably into a corner of a workshop or production room.
Because these presses utilize smaller filter plates, they do not always require complex, electrically driven hydraulic stations. We offer three primary clamping mechanisms tailored to your operational budget:
Selecting a small filter press is heavily dependent on your available floor space and daily processing volume. Below is a reference matrix for our small-scale equipment:
| Filter Plate Size (mm) | Typical Filtration Area (m²) | Cake Volume Capacity (L) | Recommended Clamping Type | Best For |
|---|---|---|---|---|
| 315 * 315 | 1m² – 3m² | 10L – 30L | Manual Jack / Manual Hydraulic | Boutique Production, Tiny Workshops |
| 400 * 400 | 2m² – 8m² | 20L – 80L | Manual Hydraulic | Craft Breweries, Small Wastewater |
| 630 * 630 | 10m² – 30m² | 120L – 400L | Semi-Automatic Hydraulic | Commercial Laundries, Stone Cutting |
Critical Logistics and Installation Note: Do not let the term “small” mislead your facility planning. The Operating Weight of these machines is still substantial due to their solid carbon steel skeletons and dense PP/Cast Iron plates. A 400mm manual hydraulic press can still weigh between 300 Kg to 800 Kg. Ensure your workshop floor, mezzanine, or transport pallet has the adequate load-bearing capacity to safely support this static weight.
Our small filter presses empower independent businesses to take control of their product quality and waste management:
If you choose a Manual Jack or Manual Hydraulic press, you do not need electricity or air for the clamping mechanism. However, you will still need a pump to feed the slurry into the press. The most common and reliable choice for small presses is a Pneumatic Diaphragm Pump, which *does* require a standard air compressor to operate.
Yes. Because the filter plates (315mm, 400mm) are small and relatively lightweight, a single operator can easily handle the entire process: clamping the press, operating the feed pump valves, and manually pulling the plates apart to drop the filter cakes into a bin below.
Absolutely. For small operations, operators typically use a standard high-pressure water hose (or a small pressure washer) to manually wash the filter cloths while they are still hanging on the plates, effectively extending the cloth’s lifespan and maintaining high filtration speeds.
